optoway sps-2340wg *********************************************************************************************************************************************************************** *********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 v2.0 1 sps-2340wg / sps-2340bwg / SPS-2340AWG (rohs compliant) 10.3 gb/s / 40 km / 1550 nm digital diagnostic sfp+ lc single-mode transceiver *********************************************************************************************************************************************************************** features l support 9.95 gbps to 10.5 gbps l complaint with sfp+ msa l compliant to ieee 802.3ae 10gbase-er l sff-8472 digital diagnostic function l temperature-stabilized 1550 nm eml transmitter l distance up to 40 km at sm fiber l ac/ac coupling according to msa l single +3.3 v power supply l low power consumption l rohs 6/6 compliant l 0 to 70 o c operating: sps-2340wg l -5 to 85 o c operating: sps-2340bwg l -40 to 85 o c operating: SPS-2340AWG l class 1 laser international safety standard iec-60825 compliant applications l 10gbase-er/ew l 40 km 10g fibre channel description the sps-2340wg series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as ieee 802.3ae 10gbase-er/ew and 10g fc. it is with the sfp+ 20-pin connector to allow hot plug capability. digital diagnostic functions are available via an i 2 c. this module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. the transmitter section uses a temperature-stabilized 1550 nm electrical-modulated laser (eml) and is a class 1 laser compliant according to international safety standard iec-60825. the receiver section uses an integrated ingaas detector preamplifier (idp) mounted in an optical header and a limiting post-amplifier ic. laser safety this single mode transceiver is a class 1 laser product. it complies with iec-60825 and fda 21 cfr 1040.10 and 1040.11. the transceiver must be operated within the specified temperature and voltage limits. the optical ports of the module shall be terminated with an optical connector or with a dust plug. order information p/no. bit rate (gb/s) 10gbase distance (km) wavelength (nm) package temp. ( o c) rohs compliant sps-2340wg 10.3 er / ew 40 1550 eml sfp+ with dmi 0 to 70 yes sps-2340bwg 10.3 er / ew 40 1550 eml sfp+ with dmi -5 to 85 yes SPS-2340AWG 10.3 er / ew 40 1550 eml sfp+ with dmi -40 to 85 yes absolute maximum ratings parameter symbol min max units notes storage temperature tstg -40 85 o c relative humidity rh 5 85 % non-condensing 0 70 sps-2340wg -5 85 sps-2340bwg operating case temperature topr -40 85 o c SPS-2340AWG power supply voltage vcc -0.5 3.6 v receiver input optical power mip 3 dbm average power
optoway sps-2340wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 v2.0 2 recommended operating conditions parameter symbol min typ max units / notes power supply voltage vcc 3.135 3.3 3.465 v 0 70 o c / sps-2340wg -5 85 o c / sps-2340bwg operating case temperature topr -40 85 o c / SPS-2340AWG relative humidity rh 5 85 % non-condensing 320 450 ma / sps-2340wg power supply current i cc (tx+rx) 320 550 ma / sps-2340a(b)wg data rate 10.3 10.5 gb/s transmitter optical specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes average launch power po, avg -4.7 +4.0 dbm 2 optical modulation amplitude po, oma -1.7 output center wavelength l c 1530 1565 nm output spectrum width l 1 nm -20 db width side mode suppression ratio smsr 30 db extinction ratio er 3.0 relative intensity noise rin -128 db/hz transmitter and dispersion penalty tdp 3 db average launch power of off transmitter -30 dbm 2. output power is power coupled into a 9/125 m m single-mode fiber. receiver optical specifications (0 o c < topr < 70 o c, 3.13v < vcc < 3.47v) parameter symbol min typ max units notes sensitivity in average power sen1 -15.8 dbm 3 receiver sensitivity in oma sen2 -14.1 dbm stressed receiver sensitivty in oma -11.3 dbm receiver overload p max -1 --- dbm los -- deasserted los d --- --- -16 dbm transition: low to high los -- asserted los a -28 --- --- dbm transition: high to low wavelength of operation l c 1530 1565 nm 3. ber < 10 -12 and prbs 2 31 -1 at 10.3125 gb/s.. electrical characteristics parameter symbol min typ max units notes high-speed signal (cml) interface specification input data rate 10.3 10.5 gb/s differential input impedance rin 100 differential data input amplitude 120 820 mvpp internally ac coupled output data rate 10.3 10.5 gb/s differential output impedance rout 100 differential data output amplitude 340 850 mvpp internally ac coupled low-speed signal (lvttl) interface specification input high voltage 2.0 vcc+0.3 v input low voltage gnd 0.8 v output high voltage 2.4 vcc v output low voltage gnd 0.5 v
optoway sps-2340wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 v2.0 3 connection diagram pin signal name description pin signal name description 1 v ee t transmitter signal ground 11 v ee r receiver signal ground 2 tx_fault transmitter fault indication. logic 1 output = laser fault. logic 0 output = normal operation 12 rd- inverse receiver data out 3 tx_disable logic 1 input (or no connection) = laser off, logic 0 = laser on. 13 rd+ receiver data out 4 sda modulation definition 2 C two wires serial id interface 14 v ee r receiver signal ground 5 sdl modulation definition 1 C two wires serial id interface 15 v cc r receiver power C 3.3v 5% 6 mod-abs modulation definition 0 C ground in module 16 v cc t transmitter power C 3.3v 5% 7 rs0 rx rate select (lvttl). this pin has an internal 30k pulldown to ground. a signal on this pin will not affect module performance. 17 v ee t transmitter signal ground 8 rx_los loss of signal out (oc). 18 td+ transmitter data in 9 rs1 tx rate select (lvttl). this pin has an internal 30k pulldown to ground. a signal on this pin will not affect module performance. 19 td- inverse transmitter data in 10 v ee r receiver signal ground 20 v ee t transmitter signal ground module definition module definition pin 4 pin 5 pin 6 interpretation by host 4 sda scl mod-abs serial module definition protocol module definition 4 specifies a serial definition protocol. for this definition, upon power up, sda and sdl appear as no connector (nc) and mod-abs is ttl low. when the host system detects this condition, it activates the serial protocol. the protocol uses the 2-wire serial cmos e 2 prom protocol of the atmel at24c01a/02/04 family of components.
optoway sps-2340wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 v2.0 4 recommended circuit schematic 0.1 f 22 f 0.1 f 22 f vee r post amp ld driver z=50 z=50 z=50 z=50 vee t 4 .7 h 4 .7 h td - td + vcc t vcc r rd - rd + 100 sfp+ module serdes 100 los rd - rd + td - td + 0.1 f protocol eeprom module detect scl sda loss of singal tx_disable tx_fault mod_abs scl sda 10 k 10 k 10 k 10 k tx_fault tx_disable (1,17,20) 3 2 18 19 16 15 12 13 8 (10,11,14) 6 5 4 10 k vcc 3.3v vcc 3.3v ic ic depending on serdes 0.1 f 30k 30k rs1 rs0 7 9 tx rate select rx rate select package diagram units in mm note: specifications subject to change without notice.
optoway sps-2340wg *********************************************************************************************************************************************************************** ********************************************************************************************************************************************************************** optoway technology inc. no .3 8, kuang fu s. road, hu kou, hsin chu industrial park, hsin chu, taiwan 303 tel: 886-3-5979798 fax: 886-3-5979737 e-mail: sales@optoway.com.tw http: // www.optoway.com.tw 12/1/2010 v2.0 5 revision history version subject release date 1.0 initial datasheet 2010/4/1 2.0 1) add sps-2340bwg for extended temperature version 2) add SPS-2340AWG for industrial temperature version 2010/12/1
|
